Century Helicopter Products Swift Manuel d'instructions télécharger pdf (Page 5)

5. Safety

Before ﬂ ying, please check to make sure no one else is operating on the same frequency.

Before ﬂ ight, please check if the batteries or transmitter have enough capacity.

Before turning on the transmitter, please check to ensure the throttle stick is in the lowest position. IDLE switch is Off.

When turning on the unit, please follow the power on/off procedure. Power ON - Turn on the transmitter ﬁ rst and then turn

on the receiver. Power OFF - Turn off the receiver ﬁ rst and then turn on the transmitter. If this protocol is not followed,

control of the model may be lost.

Before operation, check movement of all controls are smooth and no linkages are binding. Carefully inspect servos for full

operation.

Check for missing, damaged, or loose items. Carefully inspect main rotor blades and tail blades for damage. If damaged,

replace with new ones to ensure a safe ﬂ ight.

Check all ball links to ensure proper ﬁ tment. If loose, replace ball links with new ones.

Check servo plugs, ESC plugs, motor plugs, gyro plugs, and battery plugs to make sure they are securely fastened. A

loose plug may result in a complete lose of control over the model.

Check belt tension to make sure the belt is not too lose.

Symbols used to help assist you in building the kit:

THREAD LOCK

OIL

Whenever this symbol appears, us CA

(cyanoacrylate) glue.

Whenever this symbol appears, us blue

thread lock. (CN2025RS)

Whenever this symbol appears, use

grease.

Whenever this symbol appears, us red

thread lock. (CN2025BS)

THREAD LOCK

4. Before You Begin

Every attempt has been made to ease the assembly of your kit, at each step where there are complex instructions there are de-

tailed written instructions to walk you through each step. Remember to take a few minutes before each step to carefully examine

each step to become familiar with the parts and assembly before beginning that step.

1 2 3 4 5 6 7 8 9 10 ... 24 25

Pas de commentaire

Century Helicopter Products Swift Manuel d'instructions Page 5